← All articles

Customer asks for a PPWR declaration: what packaging suppliers should provide

EU declaration of conformity, supplier information pack or "PPWR certificate"? What applies since 12 August 2026, who draws up the documents and what customers cannot yet require.

Customer asks for a PPWR declaration: what packaging suppliers should provide

Since 12 August 2026 packaging suppliers have been receiving emails asking for a "PPWR declaration", a "PPWR certificate" or confirmation of a recyclability grade. Some of these requests have a legal basis, some do not. Here is which documents Regulation (EU) 2025/40 provides for, who draws them up, what a supplier should hand over today and what customers cannot yet demand. As of November 2026.

Key points

  • PPWR has no "PPWR certificate". The formal document is the EU declaration of conformity, drawn up by the packaging manufacturer after a conformity assessment.
  • A supplier of materials or components that is not the manufacturer of the finished packaging provides the manufacturer with the information and documents needed to demonstrate conformity, not its own EU declaration for someone else's packaging.
  • Today you must demonstrate, among other things, the heavy metals limit, PFAS limits (food-contact packaging only) and packaging identification.
  • Recyclability grades A–C, recycled content and minimisation apply only from 2030. Customers may ask about readiness, not "compliance".

Three documents that are often confused

DocumentWho draws it upWhat it contains
EU declaration of conformityThe packaging manufacturer (the company that makes the packaging or has it made and markets it under its name or brand)Statement that the packaging meets applicable PPWR requirements, packaging ID, manufacturer details, legislation and standards. Model in Annex VIII.
Supplier information packSupplier of packaging or packaging materialsData and evidence for the manufacturer: composition, heavy metal test results, PFAS status, specifications, recycled content, change notifications.
Commercial statementAny party in the chain, under contractSummary of compliance status for the customer. Does not replace the EU declaration.

Who is the manufacturer and who is the supplier?

  • Manufacturer: makes packaging or has it designed or made and markets it under its own name or trademark. Draws up technical documentation and the EU declaration and keeps them for 5 years (single-use) or 10 years (reusable).
  • Supplier: supplies packaging or packaging materials to the manufacturer, e.g. film, board, caps, labels or masterbatch. Must provide the information and documentation needed to demonstrate conformity.
  • Importer and distributor: check the manufacturer has met its obligations. If they market packaging under their own brand or modify it in a way that affects conformity, they take on manufacturer obligations, which matters for private label.

Example: a cosmetics brand buys an HDPE bottle, a PP cap, a label and a shipping carton. Each supplier provides data on its component; the declaration for the finished packaging comes from whoever is its manufacturer under PPWR.

What customers can require today

RequirementStatus in November 2026Evidence
Heavy metals: lead, cadmium, mercury and hexavalent chromium together max. 100 mg/kgAppliesTest results or material data in the technical documentation
PFAS in food-contact packagingApplies, food-contact onlyTests or raw material supplier declarations; "not applicable" for other packaging
Packaging and manufacturer identification (type, batch or number, name, address)AppliesMarking on packaging or accompanying documents
Technical documentation and EU declarationApplies for requirements already in forceDeclaration per packaging type; documentation on authority request
Recyclability grade A–CFrom 2030 (or later, depending on delegated acts)Readiness analysis for now, not a formal grade
Minimum recycled content in plasticsFrom 2030Recycled content data, without confirming "2030 compliance"
Minimisation and format restrictionsFrom 2030Readiness analysis
Harmonised material labelAwaiting Commission implementing actCannot be certified today

PFAS causes the most confusion. PPWR limits apply only to packaging intended for food contact. For a shipping carton or stretch film the correct answer is "not applicable", not "compliant".

Do you have to send the full technical file?

No. PPWR does not require sending full technical documentation to every customer. The manufacturer keeps it and makes it available to market surveillance authorities on reasoned request. A customer usually needs the EU declaration and an evidence summary. Share formulations, know-how or full test reports only where a contract requires it, ideally under an NDA.

What a supplier should send: a practical pack

If you manufacture the finished packaging

  1. PPWR status sheet (1–2 pages): packaging ID, your role, assessment date, status of each requirement.
  2. EU declaration of conformity for the specific packaging type, covering requirements already in force.
  3. Evidence summary for heavy metals and, where relevant, PFAS.
  4. Identification of packaging and manufacturer.
  5. Status of future requirements: recyclability, recycled content, minimisation, labelling, noting they depend on Commission acts.

If you supply a material or component

  • Product ID and specification version.
  • Material composition to the level needed for recyclability assessment.
  • Heavy metals evidence and PFAS status.
  • Recycled content, if any, with verification method.
  • Commitment to notify changes in raw materials or process.

Do not issue an EU declaration for your customer's finished packaging if you are not its manufacturer.

How to answer procurement questionnaires

  • Compliant: the requirement applies and you have evidence.
  • Not applicable: the requirement does not cover this packaging, e.g. PFAS for non-food packaging.
  • Not yet applicable: the requirement applies in future, e.g. recyclability grades from 2030; you may add readiness information.

Be careful with claims of "PPWR 2030 compliance": the criteria are not final yet, so such a claim may be misleading.

Short reply template

"Please find the EU declaration of conformity for packaging [type] with an evidence summary for PPWR requirements applicable since 12 August 2026 (substances, identification). Requirements on recyclability, recycled content and minimisation apply from 2030; we can share our readiness status on request. Full technical documentation is available to market surveillance authorities."

Checklist for packaging suppliers

  1. Define your role for each product: manufacturer, supplier, importer or distributor.
  2. Collect evidence from your raw material suppliers.
  3. Prepare technical documentation and EU declarations for packaging you manufacture.
  4. Prepare a standard customer pack and reply template.
  5. Plan a readiness analysis for 2030 requirements.

We support this through a PPWR audit and PPWR implementation. For the basics see What is PPWR.

  • Regulation (EU) 2025/40 on packaging and packaging waste, in particular Articles 5, 6, 7, 10, 12, 15 (manufacturers), 16 (suppliers), 18, 19, 21 (importers and distributors), 38–39 (conformity assessment and EU declaration) and Annexes VII and VIII: eur-lex.europa.eu/eli/reg/2025/40/oj
  • Regulation (EC) No 1935/2004 on food contact materials

This article is for information only and is not legal advice. Some requirements depend on Commission implementing and delegated acts.

Contact

Let's talk about your EPR

Tell us what you sell and in which countries. We reply within one business day with your obligations and a quote.

info@otoneso.com+48 459 596 793